indigo
The Evolution of Indigo: Fading & Casts
Buying Japanese denim is just the beginning. Unlike mass-produced clothing, our denim is a "living" material that transforms through your movements and everyday life. In the following images, you can see the impressive transformation from raw fabric by the metre into a unique piece with its own character.
The Fading – Your Personal Map
Indigo is a dye that does not penetrate deep into the core of the cotton fiber, but rather forms a layer around it. Through friction and wear, this layer breaks down in the areas that are most stressed – at the joints, the pockets, or the hem. This creates the iconic contrasts:
- Whiskers: The radial creases at the hip.
-
Honeycombs: The honeycomb pattern behind the knees.
Depending on the structure of the fabric – whether smooth twill or characterful slub – this fading can appear sharply defined and high-contrast, or soft and fluid.
Red Cast vs. Green Cast – The Soul of Color
When you compare our indigo fabrics, you will notice that blue is not always blue. Depending on the technical dyeing process, the denim develops a specific color cast:
Red Cast: The Classic
This denim has a subtle purple-red undertone and appears very rich and deep blue when new. As it fades, it usually develops a very distinct light blue contrast that is reminiscent of the vintage look of the 1950s.
- The technical difference: Red Cast is created using the classic Pure Indigo dyeing process. The yarn is repeatedly dipped into pure indigo baths and oxidized in the air in between. Since pure indigo naturally has a slightly purple color spectrum, this deep, cool blue shade is created without additional dyes.
Green Cast: The Vintage Legacy
This denim has a more earthy look and a slight greenish or yellowish tint that is often only visible in direct comparison or in sunlight. It fades to a beautiful, almost sea-green or teal blue that has a very authentic 1940s "old-school" patina.
- The technical difference: The secret of the green cast lies in "sulfur bottoming." Before the yarn is placed in the actual indigo bath, it is primed (dipped) with a yellow or green sulfur dye. When the indigo later rubs off during wear, this sulfur-yellow primer shines through the remaining blue, creating the legendary green tint.
1. Desizing
Before the color can be applied, the protection must be removed. Weft yarns for twill weave are coated with starch (sizing) during weaving to make them tear-resistant.
- Chemicals: Enzymes (amylase) or a mild alkali (sodium carbonate).
- Process: The fabric is soaked in hot water with enzymes. Without this step, the indigo would only sit on the starch and completely wash off with the first wash.
2. Scouring
Cotton contains natural fats, waxes, and pectins that are water-repellent.
- Chemicals: Sodium hydroxide (caustic soda) and surfactants.
- Process: Boiling in the lye "opens" the fiber and makes it absolutely absorbent. Only then can the indigo later reach the deep valleys of the twill structure.
3. Vatting
Indigo powder is insoluble in water. We must convert it into a soluble form: the leuco form. For this, we use the tried-and-true 1-2-3 fructose vat.
- Chemicals: 1 part indigo powder, 2 parts calcium hydroxide, and 3 parts fructose. Very hot water (approx. 79–82 °C) is used as the base. As the fine powders can be irritating, gloves, eye protection, and a dust mask are strongly recommended.
-
Process: The ingredients are dissolved one by one in hot water and added to the vat. The vat is then stirred vigorously for two to three minutes. When you slowly pull out the stirring stick, a collection of bubbles forms on the surface—the so-called indigo rose (or indigo flower).
If you now let the vat rest, this flower floats on top and the surface develops a coppery shimmer. Beneath it, the liquid becomes clear within about 30 minutes and takes on a yellow or amber color. Only in this reduced state can the molecules penetrate the cotton.
Die Mathematik des Blaus: Mischverhältnisse
Tipp: Um die richtigen Mengen zu berechnen, musst du vorab entscheiden, welchen Blauton du erzielen möchtest. Die Farbstoffmenge wird dabei in Gramm Indigo pro Liter (g/L) angegeben.
Tipp zur Wassermenge: Für einen herkömmlichen Eimer (ca. 19 Liter Volumen) ist eine 16-Liter-Küpe ideal. Das lässt genau den nötigen Freiraum, um den Stoff später einzutauchen, ohne dass die Flüssigkeit überläuft.
| Blauton | g/L | Rezeptur (16L Küpe) |
|---|---|---|
LeichtesBlau |
2 - 2,5 g/L | 32g Indigo, 64g Calciumhydroxid, 96g Fructose |
MittleresBlau |
3 - 6 g/L | 80g Indigo, 160g Calciumhydroxid, 240g Fructose |
DunklesBlau |
7 - 10 g/L | 128g Indigo, 256g Calciumhydroxid, 384g Fructose |
4. The Dipping Process
The fabric is now slowly lowered into the yellow vat without air bubbles.
- Process: The time spent in the bath determines how many molecules attach to the fiber. Important: The fabric must not touch the bottom of the vessel (where the chemical sludge is located) to avoid stains.
5. Oxidation (The Blue Wonder)
The most magical moment of the process. As soon as the fabric is removed from the vat, it is yellow-green.
- Process: Through contact with oxygen, the indigo white is transformed back into its insoluble, blue pigment form. The molecules are "trapped" in the fiber. Only now can the true indigo blue be seen.
6. Multiple Layering
A single dip only yields a pale light blue.
- Process: The alternating between dipping and oxidizing is repeated several times (often 8 to 30 times). With each pass, a new layer of indigo is deposited on top of the previous one. This is how the incredible color depth of dark denim is created.
7. Neutralization & Rinsing
The aggressive lye must be removed from the fabric to avoid damaging the cotton fiber.
- Chemicals: Acetic acid or citric acid (to neutralize the pH).
- Process: The fabric is rinsed until the water is clear and the pH is neutral (approx. 7). This fixes the color and makes the fabric feel firm.
Note for connoisseurs:
This process is particularly effective with 100% cotton, as the twill weave, due to its diagonal structure, offers a large surface area for pigment deposition, while later mechanical abrasion precisely at these raised areas re-exposes the white of the core.